Mirro-Mastic® Bond
Directions for Use:
1. Make sure that the substrate is free of dust, clean
and dry. Never apply Bond or mastic to a painted surface.
2. Brush or roll Bond on the substrate and allow to dry.
3. For very porous substrates, two coats of Bond may be
necessary. Allow the first coat to dry before applying
the second.
4. Drying time is approximately one hour, but will depend
on temperature, humidity, and type of substrate.
5. Allow drying time before applying mastic.
6. For ceiling applications, technical questions, or a MSDS, please contact Palmer Products technical services at 800.431.6151
or by e-mail palmer@mirro-mastics.com.
Clean Up: Mineral spirits
Coverage: 1 Gallon covers approximately 400 square
feet, (37 square meters).
WARRANTY DISCLAIMER
Nothing herein shall be deemed to constitute a warranty, either
express or implied by Palmer Products Corporation with respect
to Mirro-Mastic® Bond or any other Palmer product.
Palmer hereby disclaims all warranties, including without limitation,
implied warranties of merchantability and fitness for a particular
purpose. This disclaimer shall extend to all users of Palmer
products and to any third party. Any dispute or claim
of whatsoever type arising out of the use of any Palmer product
shall be governed by the laws of the Commonwealth of Kentucky.
Palmer's sole liability, if any, and any user's or third party
claimant's sole and exclusive remedy relating to any such dispute
or claim shall be replacement of the Palmer product used.
|
|
|
