Mirro-Mastic®

1. PRODUCT NAME
Mirror Mastic: Mirro-Mastic®

2. MANUFACTURER
Palmer Products Corporation
P.O. Box 7155
Louisville, KY 40257
Phone: (800)431-6151
(502) 893-3668
FAX: (502) 895-9253
Web site: www.mirro-mastic.com
E-mail: palmer@mirro-mastic.com

3. PRODUCT DESCRIPTION
Basic Use: Mirro-Mastic® is a high quality adhesive mastic formulated for adhering plate glass mirror and acrylic mirror onto various substrates.

4. TECHNICAL DATA
Composition and Materials: Mirro-Mastic® is an asphalt base adhesive.
Flash point: Over 160°F (71.1°C)
VOC Content: 230g/L
Color: Black
Application: Electric Applicator, Mastic Stik or caulking gun
Coverage: With minimum coverage, one gallon will install approximately 130 square feet (12 square meters) of mirror, one 29 ounce cartridge will install approximately 30 square feet (2.8 square meters) of mirror, and one 11 ounce cartridge will install approximately 12 square feet (1.1 square meters) of mirror.
Clean up: Mineral spirits
Storage: Ideal storage 50°F to 85°F (10° to 29.4°C)
Shelf Life: Two years from the date on an unopened can. One year from the date on an unopened cartridge.
Packaging: 11 oz. cartridges(24 per case)
                   29 oz. cartridges(12 per case)
                   1 gallon cans(4 per case)
                   5 gallon drums
                   Custom packaging available

WARNING
All Palmer products must be used only for approved purposes, and must be applied in accordance with Palmer's installation instructions, as set forth in Palmer's specification sheet and installation guides (available upon request from Palmer or its distributors). The user bears all risk of damage, injury or other loss arising out of any non-approved use and/or improper installation of any Palmer product. If Palmer's installation instructions are not followed, in whole or part, for whatever reason, then mechanical fasteners of sufficient size and strength must immediately be used to insure safety of the installation pending prompt proper reinstallation by the product user. Any failure to properly utilize or apply any Palmer product may result in property damage, bodily injury or death. Palmer shall not be responsible for these or any other types of misuse of its products.